Car polishing
A machine polish that lifts oxidation and light swirl marks and brings the gloss back to your paint.
- Booking
- Online, 24/7
- Workshops
- 2

Machine Polish
Central Coast
| Package | Sedan / Mini SUV | SUV | Ute / 4x4 |
|---|---|---|---|
Machine PolishAbout 4 hrsBrings back gloss by machine polishing out oxidation and light swirls.
| $299 | $349 | $379 |
Auburn
| Package | Sedan | SUV | UTE / 4x4 |
|---|---|---|---|
Machine PolishAbout 2 hrsMachine polish to lift swirl marks and restore a deep gloss.
| $299 | $349 | $375 |
Before and after
See the difference
Drag the handle, or use the arrow keys, to compare flat, oxidised paint with a polished, glossy finish. An illustration: one photo, with the before simulated.

What a machine polish does
Paint loses its shine when the top of the clear coat stops being smooth. Sun, salt and careless washing leave it covered in tiny marks, and light scatters off them instead of reflecting back. A machine polish takes off a very thin layer of clear coat to level the surface again, so the paint looks deep and glossy rather than flat or hazy.
Open each one to see whether it sounds like your car:
Oxidation
A chalky, faded look, common on cars that have spent years parked in the sun. Polishing removes the tired top layer and brings the depth back.
Light swirl marks
Fine circular scratches that show under sunlight or a street light, usually left by brush washes or dirty wash mitts. Polishing levels them out.
Light etching
Faint marks from bird droppings or gum sap that sat on hot paint for too long. Most light etching polishes out.
What a polish won't fix
Deep scratches that have gone through the clear coat, stone chips and rust. If a fingernail catches in a scratch, it is likely too deep to polish out completely. We'll tell you before we start.
Freshly polished paint is bare, so it pays to protect it. Our paint protection adds a nano-ceramic layer over the polish, and a Gtechniq ceramic coating includes paint correction as standard. Either way, wash by hand with a pH-neutral shampoo and skip brush washes so the swirls stay away.

Step by step
A machine polish takes a few hours in our workshop (each workshop’s time is listed with the package), and the work always runs in the same order. Open a step to see what happens.
1. Hand wash and decontamination
Polishing a dirty car grinds the dirt into the paint, so the car is hand washed first, then treated for iron fallout and clayed to lift bonded grime.
2. Inspection
We check the paint under good light to see what can be improved and how much clear coat there is to work with.
3. Machine polish
A single-stage polish with the pad and compound that suit your paint. Some paints are soft and mark easily; others are hard and need more work.
4. Gloss finish and final check
We wipe away the polish residue, add a gloss-enhancing finish and check every panel again before you collect.
When a polish makes sense
A polish is worth doing at a few points in a car's life.
- Before you sell. Swirl-free, glossy paint makes a car look younger in photos and in person. At Central Coast, our Pre-Sale Detail already includes a machine polish along with a full interior clean.
- Before you protect the paint. Any wax, sealant or coating locks in what is underneath, so it pays to polish first. Our paint protection service includes the polish.
- When the paint has gone flat. If washing no longer brings the shine back, the clear coat surface is the problem, not the dirt.
Booking a machine polish
Machine Polish sits in our detailing range and books online like any detailing package: choose your vehicle size, a day and a drop-off time, and you'll see the total before you pay. Pay a 20% deposit (non-refundable if cancelled within 24 hours of your appointment) and the balance at the counter, or pay in full online.
Drop off at the workshop you booked, at a time that suits you during opening hours. If the paint has deep scratches or heavy oxidation, call 02 4325 5000 first and send a photo; we'll tell you what a polish can do. At Central Coast, our Pre-Sale and Post-Holiday Details already include a machine polish, so there's no need to book both.

How are your prices worked out?
Detailing, machine polishing and ceramic coating prices are set by car size, in 3 bands: Sedan / Mini SUV, SUV, and Ute / 4x4. Window tint is priced by the film and the number of windows, so it costs the same for every size. Paint protection depends on your paint, so where it shows no price, call 02 4325 5000 (Central Coast) or 02 9648 2305 (Auburn) for a quote. Every bookable service shows its price before you pay.
How long does each service take?
Every package shows its time in the workshop when you book. As a guide: Exterior Wash about 1 hour; Exterior Detail about 2 hours; Honey's Maintenance about 2 hours; Honey's Complete Detail about 5 hours; Pre-Sale Detail about 7 hours and Post-Holiday Detail about 7 hours; machine polish about 4 hours. Window tint: about 2 hours for the front two windows and 3 hours for the full car. Ceramic coating keeps your car with us for 1–2 days.
How can I pay?
Online you can pay by card, Apple Pay or Google Pay, either a 20% deposit or the full amount. If you pay a deposit, you pay the balance at the counter when you collect your car.
