Boat detailing
Salt, sun and UV are working on your boat every day. We work harder, restoring and protecting trailer boats so they look sharp on the water and hold their value.
- Booking
- Written quote
- Workshop
- Central Coast
- Quote
- Within 24 hours

Prices and terms
Only at our Central Coast (Wyoming) workshop.
| Service | Price | Minimum |
|---|---|---|
| Maintenance Wash & DryHull sides, deck, glass, rails and a chrome wipe | $12/ft | $180 |
| Wash & SealantThe wash plus a hand-applied marine sealant | $26/ft | $390 |
| One-Step PolishLight oxidation removal and gloss enhancement, plus sealant | $42/ft | $630 |
| Cut & Polish RestorationHeavy oxidation, chalking and faded gelcoat: a two-stage correction plus sealant | $68/ft | $1,020 |
| Ceramic Coating, hull sidesOne-step polish prep included | from $95/ft | $1,425 |
| Interior Cabin DetailVacuum, upholstery clean, mould treatment, surfaces and glass | from $300 | n/a |
From $12/ft (minimum $180), final quote after assessment.
Add-ons
- Vinyl and upholstery clean and condition: $120–$250
- Teak clean and treat: $18/ft of teak area
- Engine bay or bilge clean: $150–$280
- Canvas and clears clean and protect: $120–$220
- Mould and mildew treatment: from $90
- Trailer wash and wheel and bearing-area clean: $60
Terms
- Boats must arrive on a roadworthy trailer, with the bung and loose gear removed or listed.
- Jobs are quoted for 1–5 working days. Boats left on site after completion incur $40 a day.
- Cut & Polish and Ceramic need a 50% deposit.
Call 02 4325 5000 or send an enquiry: we quote within 24 hours.
Why owners choose us
We bring the same obsessive finish we put on cars to trailer boats. Bring your boat to our Wyoming workshop and we'll restore it, protect it and keep it looking sharp.
- Gelcoat restoration that brings back depth and gloss, not just a quick shine.
- Undercover, controlled-environment work. No sun, wind or dust ruining a finish while it cures.
- Marine-grade products built for UV, salt and humidity.
- A fixed written quote before we start, and photos at every stage.
How it works
Send us your boat's length, the trailer details and a few photos: call 02 4325 5000, or send an enquiry. We'll quote within 24 hours, book a drop-off day, and message you when it's ready for pickup. Not sure of the length? Measure from the bow to the transom, or tell us the make and model.
The prices above are per foot of overall length, excluding the trailer, with a minimum for each service. They show where a job starts: the final quote follows an assessment of the hull, and it's fixed and written before any work begins.
Which service suits your boat
- Maintenance Wash & Dry. For a hull in good shape: the hull sides, deck, glass and rails washed, and the chrome wiped.
- Wash & Sealant. The wash plus a hand-applied marine sealant, so salt and grime let go more easily after each trip.
- One-Step Polish. For light oxidation: a single machine polish brings the gloss back, then a sealant protects it.
- Cut & Polish Restoration. For heavy oxidation, chalking and faded gelcoat: a two-stage correction, then sealant.
- Ceramic Coating, hull sides. A one-step polish first, then a hard, slick coating that resists UV and salt for longer than any sealant.
- Interior Cabin Detail. Vacuum, upholstery clean, mould treatment, surfaces and glass.

Gelcoat, oxidation and UV
Gelcoat is the hard, glossy outer layer of a fibreglass hull. Sun and salt slowly break down its surface, and it turns chalky: rub a finger along a faded hull and it comes away white. That chalk is oxidised gelcoat, and the longer it's left, the deeper it goes.
Light oxidation polishes out in a single stage. Heavier oxidation needs a cut first, with a more aggressive compound, and then a polish to bring the gloss back. Either way, bare polished gelcoat needs protecting, which is why every polish we do finishes with a sealant or a ceramic coating. A protected hull also cleans up with a rinse, rather than a scrub.
Looking after your boat between trips
A few minutes after each trip saves hours of correction later:
- Rinse with fresh water as soon as the boat is back on the trailer: hull, deck, rails and the trailer itself, before the salt dries.
- Dry the brightwork. Chrome and stainless spot quickly when salt water dries on them.
- Cover it, or store it out of the sun. UV is what turns gelcoat chalky, and a cover is the cheapest protection there is.
- Air the cabin. Damp upholstery and closed hatches are how mould starts.
A sealed or coated hull makes all of this quicker, because salt and grime have less to hold on to.
Do you detail jet skis, boats and caravans?
Yes. At our Central Coast workshop: jet skis, which you can book online at a fixed price by ski size; and boats and caravans, which we quote per foot (call or send an enquiry). Our Auburn workshop details cars only. Prices and what each service includes: jet skis (/services/jet-ski-detailing/), boats (/services/marine-detailing/) and caravans (/services/caravan-detailing/).
